: Results:

Property	Criteria	Matches
Fabrication + Method (NA)	Film Extrusion - Cast Film	60 of 381

Legend (Close)

Technical Datasheet, Material Safety Datasheet

Material Safety Datasheet, Regulatory Datasheet

Regulatory Datasheet

Page
1 of 3

1	2	3

Action	Product	Generic	Density (g/cm³)	Melt Mass Flow Rate (g/10 min)
	AFFINITY™ EG 8185	POP	0.885 (ASTM D792)	30 (190°C/2.16 kg, ASTM D1238)
	AFFINITY™ EG 8200G	POP	0.870 (ASTM D792)	5.0 (190°C/2.16 kg, ASTM D1238)
	AFFINITY™ KC 8852G	POP	0.875 (ASTM D792)	3.0 (190°C/2.16 kg, ASTM D1238)
	AFFINITY™ PL 1280G	POP	0.900 (ASTM D792)	6.0 (190°C/2.16 kg, ISO 1133)
	AFFINITY™ PL 1850G	POP	0.902 (ASTM D792)	3.0 (190°C/2.16 kg, ASTM D1238)
	AFFINITY™ PL 1888G	POP	0.904 (ASTM D792)	1.0 (190°C/2.16 kg, ASTM D1238)
	AMPLIFY™ GR 204	MAH-g	0.954 (ISO 1183)	12 (190°C/2.16 kg, ASTM D1238); 12 (190°C/2.16 kg, ISO 1133)
	AMPLIFY™ GR 205	MAH-g	0.960 (ISO 1183)	2.0 (190°C/2.16 kg, ASTM D1238); 2.0 (190°C/2.16 kg, ISO 1133)
	AMPLIFY™ GR 207	MAH-g	0.923 (ASTM D1505)	2.1 (190°C/2.16 kg, ASTM D1238); 2.1 (190°C/2.16 kg, ISO 1133)
	AMPLIFY™ GR 213	MAH-g	0.921 (ASTM D1505)	2.0 (190°C/2.16 kg, ASTM D1238)
	AMPLIFY™ IO 3701	Ionomer	0.940 (ASTM D792)	5.2 (190°C/2.16 kg, ASTM D1238)
	AMPLIFY™ IO 3702	Ionomer	0.940 (ASTM D792)	14 (190°C/2.16 kg, ASTM D1238)
	AMPLIFY™ IO 3801	Ionomer	0.940 (ASTM D792)	1.3 (190°C/2.16 kg, ASTM D1238)
	AMPLIFY™ IO 3801B	Ionomer	0.940 (ASTM D792)	1.3 (190°C/2.16 kg, ASTM D1238)
	AMPLIFY™ IO 3802	Ionomer	0.954 (ASTM D792)	2.8 (190°C/2.16 kg, ASTM D1238)
	ATTANE™ 4404G	ULDPE	0.904 (ASTM D792)	4.0 (190°C/2.16 kg, ASTM D1238)
	ATTANE™ NG 4701G	ULDPE	0.912 (ASTM D792)	0.80 (190°C/2.16 kg, ASTM D1238)
	ATTANE™ NG 4703G	ULDPE	0.905 (ASTM D1505)	0.50 (190°C/2.16 kg, ASTM D1238)
	Developmental D 118.01	PP Homopolymer	0.900 (ASTM D792)	8.0 (230°C/2.16 kg, ASTM D1238)
	Developmental D 218.00	PP Homopolymer	0.900 (ASTM D792)	8.0 (230°C/2.16 kg, ASTM D1238)
Action	Product	Generic	Density (g/cm³)	Melt Mass Flow Rate (g/10 min)

Page
1 of 3


1	2	3

NOTICE: If products are described as "experimental" or "developmental": (1) product specifications may not be fully determined; (2) analysis of hazards and caution in handling and use are required; (3) there is greater potential for Dow to change specifications and/or discontinue production; and (4) although Dow may from time to time provide samples of such products, Dow is not obligated to supply or otherwise commercialize such products for any use or application whatsoever.