: Results:

Legend (Close)

Technical Datasheet, Material Safety Datasheet

Material Safety Datasheet, Regulatory Datasheet

Regulatory Datasheet

Page
1 of 3

1	2	3

Action	Product	Generic	Density (g/cm³)	Melt Mass Flow Rate (g/10 min)
	Developmental D 221.00	PP Homopolymer	0.900 (ASTM D792)	35 (230°C/2.16 kg, ASTM D1238)
	Developmental D 223.00	PP Homopolymer	0.900 (ASTM D792)	2.0 (230°C/2.16 kg, ASTM D1238)
	Developmental D 359.00	PP Impact Copolymer	0.900 (ASTM D792)	1.9 (230°C/2.16 kg, ASTM D1238)
	Developmental DC7054.00	PP Impact Copolymer	0.900 (ASTM D792)	7.0 (230°C/2.16 kg, ASTM D1238)
	DOWLEX™ IP 40	HDPE	0.952 (ASTM D792)	40 (190°C/2.16 kg, ASTM D1238)
	DOWLEX™ IP 41	HDPE	0.956 (ASTM D792)	42 (190°C/2.16 kg, ASTM D1238)
	DOW™ HDPE DGDA-5004 NT 7	HDPE	0.961 (ASTM D792)	0.80 (190°C/2.16 kg, ASTM D1238); 57 (190°C/21.6 kg, ASTM D1238)
	DOW™ HDPE DMDA-8940 NT 7	HDPE	0.951 (ASTM D792)	44 (190°C/2.16 kg, ASTM D1238)
	DOW™ HDPE DMDA-8950 NT 7	HDPE	0.942 (ASTM D792)	50 (190°C/2.16 kg, ASTM D1238)
	DOW™ HDPE DMDA-8965 NT 7	HDPE	0.952 (ASTM D792)	66 (190°C/2.16 kg, ASTM D1238)
	DOW™ LDPE 5004I	LDPE	0.924 (ASTM D792)	4.2 (190°C/2.16 kg, ASTM D1238)
	DOW™ LDPE 722	LDPE	0.918 (ASTM D792)	8.0 (190°C/2.16 kg, ASTM D1238)
	DOW™ LDPE 959S	LDPE	0.923 (ASTM D792)	55 (190°C/2.16 kg, ASTM D1238)
	DOW™ LDPE 993I	LDPE	0.923 (ASTM D792)	25 (190°C/2.16 kg, ASTM D1238)
	DOW™ LLDPE DNDA-1081 NT 7	LLDPE	0.931 (ASTM D792)	130 (190°C/2.16 kg, ASTM D1238)
	DOW™ LLDPE DNDA-1082 NT 7	LLDPE	0.933 (ASTM D792)	160 (190°C/2.16 kg, ASTM D1238)
	DOW™ LLDPE DNDA-7144 NT 7	LLDPE	0.924 (ASTM D792)	20 (190°C/2.16 kg, ASTM D1238)
	DOW™ LLDPE DNDA-8335 NT 7	LLDPE	0.926 (ASTM D792)	35 (190°C/2.16 kg, ASTM D1238)
	DOW™ LLDPE DNDB-1077 NT 7	LLDPE	0.929 (ASTM D792)	100 (190°C/2.16 kg, ASTM D1238)
	DOW™ LLDPE DNDB-7147 NT 7	LLDPE	0.926 (ASTM D792)	50 (190°C/2.16 kg, ASTM D1238)
Action	Product	Generic	Density (g/cm³)	Melt Mass Flow Rate (g/10 min)

Page
1 of 3


1	2	3

NOTICE: If products are described as "experimental" or "developmental": (1) product specifications may not be fully determined; (2) analysis of hazards and caution in handling and use are required; (3) there is greater potential for Dow to change specifications and/or discontinue production; and (4) although Dow may from time to time provide samples of such products, Dow is not obligated to supply or otherwise commercialize such products for any use or application whatsoever.