Friday, September 04, 2015
TIPPLEN® K 948
Units 
TVK Plc. (Tiszai Vegyi Kombinát) - Polypropylene Impact Copolymer
ActionLegend (Open)
E-mail a Datasheet Print this Page  

General Information
Product Description
TIPPLEN K 948 is an impact copolymer polypropylene for injection moulding. The grade contains nucleated agent. This grade offers very high flow and outstanding process ability for shorter cycle times.

TIPPLEN K 948 is recommended for the production of household and kitchen articles, thin-walled packaging containers, pails, closures, boxes, bins.

TIPPLEN K 948 is suitable for food contact. The product complies with Food Contact Regulations.
General  
Material Status 
  • Commercial: Active
Additive 
  • Nucleating Agent
Features 
  • Fast Molding Cycle
  • Food Contact Acceptable
  • Good Processability
  • High Flow
  • Impact Copolymer
  • Nucleated
  • Recyclable Material
Uses 
  • Closures
  • Household Goods
  • Kitchenware
  • Pails
  • Thin-walled Containers
  • Thin-walled Packaging
  • Toys
Forms 
  • Pellets
Processing Method 
  • Injection Molding
ASTM and ISO Properties 1
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
45
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
1350
MPa
ISO 527-2
Tensile Stress (Yield, Injection Molded)
27.0
MPa
ISO 527-2
Tensile Strain (Yield, Injection Molded)
5.0
%
ISO 527-2
Flexural Modulus (Injection Molded)
1350
MPa
ISO 178
Impact
Nominal Value
Unit
Test Method
    ISO 180/A
-20°C, Injection Molded
3.5
kJ/m²
 
23°C, Injection Molded
8.0
kJ/m²
 
Hardness
Nominal Value
Unit
Test Method
88
 
ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)
97.0
°C
ISO 75-2/B
Processing Information
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
190 to 240
°C
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL Prospector

UL and the UL logo are trademarks of UL LLC © . All Rights Reserved.

Nominal ValueThe information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

www2.ulprospector.com