Nexeo Solutions, LLC
Sunday, November 23, 2014
MAGNUM™ 3404 Smooth
Units 
Styron LLC - Acrylonitrile Butadiene Styrene
ActionLegend (Open)
Request for Quote E-mail a Datasheet Print this Page  

General Information
Product Description
MAGNUM™ 3404 Smooth is an excellent general purpose extrusion / thermoforming resin with outstanding processability. The mass (continuous process) ABS technology ensures an ABS resin that combines excellent processability with a stable light base colour that is ideal for self-colouring. The new MAGNUM 'Smooth Series' resins have an ultra low particulate content, which results in a superb surface finish that will enable our customers to produce parts with excellent aesthetics at a lower total cost.

Applications:
  • Transportation
  • Sanitary ware
  • Signage
  • Furnishings
  • Protective covers
  • Marine
  • Recreational vehicles
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • Latin America
 
Features 
  • Good Processability
  • Pleasing Surface Appearance
 
Uses 
  • Furniture
  • General Purpose
  • Marine Applications
  • Protective Coverings
 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
  • Thermoforming
ASTM & ISO Properties 1
Physical
Nominal Value
Unit
Test Method
Density
1.05
g/cm³
ISO 1183/B
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
4.7
g/10 min
ISO 1133
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
6.70
cm³/10min
ISO 1133
Molding Shrinkage - Flow
0.40 to 0.70
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (3.20 mm, Injection Molded)
2150
MPa
ISO 527-2
Tensile Stress (Yield, 3.20 mm, Injection Molded)
43.0
MPa
ISO 527-2/50
Tensile Strain (Yield, 3.20 mm, Injection Molded)
2.7
%
ISO 527-2/50
Flexural Modulus 2, 3 (3.20 mm, Injection Molded)
2100
MPa
ISO 178
Flexural Stress 2, 3 (3.20 mm, Injection Molded)
70.0
MPa
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     
-30°C, Injection Molded
13
kJ/m²
ISO 179/1eA
-30°C, Injection Molded
8.0
kJ/m²
ISO 179/2C
23°C, Injection Molded
18
kJ/m²
ISO 179/1eA
23°C, Injection Molded
13
kJ/m²
ISO 179/2C
Notched Izod Impact Strength
    ISO 180/A
-30°C, Injection Molded
11
kJ/m²
 
23°C, Injection Molded
19
kJ/m²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (1.8 MPa, Annealed)
101
°C
ISO 75-2/A
Vicat Softening Temperature
102
°C
ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Burning Rate 4 (2.00 mm)
50
mm/min
ISO 3795
Flame Rating 4
    UL 94
1.50 mm
HB
 
 
3.00 mm
HB
 
 
Notes
1Typical properties: these are not to be construed as specifications.
22.0 mm/min
33-points
4This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
UL IDES

UL and the UL logo are trademarks of UL LLC © . All Rights Reserved.

Nominal ValueThe information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

www2.ulprospector.com