Resinex, Member of the Ravago Group
Saturday, October 19, 2019
Braskem PE SHC7260LS-L
Units 
Braskem Europe GmbH - High Density Polyethylene
ActionLegend (Open)
E-Mail a Datasheet Print this Page  

General Information
Product Description
SHC7260LS-L is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. This resin has additives against the ultraviolet radiation action. The minimum biobased content of this grade is 94%, determined according to ASTM D6866.

Application:
Boxes for frozen food and agricultural products, industrial containers and boxes for general use, Safety Helmets, Toilet seats, Housewares, Toys, Lids, Caps &Closures, Pallets and Boxes for beverages bottles.

Process:
Injection Molding.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • UV Stabilizer
Features 
  • High Hardness
  • High Stiffness
  • Low Warpage
  • Renewable Resource Content
  • UV Stabilized
Uses 
  • Agricultural Applications
  • Caps
  • Closures
  • Household Goods
  • Industrial Containers
  • Lids
  • Pallets
  • Safety Helmets
  • Toys
Agency Ratings 
  • FDA 21 CFR 177.1520
Processing Method 
  • Injection Molding
ASTM & ISO Properties 1
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
0.959
g/cm³
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
7.2
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (ESCR) (50°C, 2.00 mm, 100% Igepal, Compression Molded, F50)
< 4.00
hr
 ASTM D1693
Biobased Content
94
%
 ASTM D6866
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Compression Molded)
30.0
MPa
 ASTM D638
Tensile Elongation (Yield, Compression Molded)
7.5
%
 ASTM D638
Flexural Modulus - 1% Secant (Compression Molded)
1350
MPa
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (Compression Molded)
35
J/m
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Compression Molded)
64
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded)
76.0
°C
 ASTM D648
Vicat Softening Temperature
126
°C
 ASTM D1525 2
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
 
Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.