Resinex, Member of the Ravago Group
Saturday, October 19, 2019
Braskem PE SGF4950HS
Units 
Braskem Europe GmbH - High Density Polyethylene
ActionLegend (Open)
E-Mail a Datasheet Print this Page  

General Information
Product Description
SGF4950HS is a High Density Polyethylene, copolymer, offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products. The minimum biobased content of this grade is 95%, determined according to ASTM D6866.

Application:
Suggested uses include:
Canisters from 2 to 20L for chemical products;
Flasks for concentrated detergent.
Others applications: Reservoir for wind shield wiper and air ducts.

Process:
Blow Molding.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Copolymer
  • Good Processability
  • High ESCR (Stress Crack Resist.)
  • Renewable Resource Content
  
Uses 
  • Bottles
  • Containers
  
Agency Ratings 
  • FDA 21 CFR 177.1520
Processing Method 
  • Blow Molding
ASTM & ISO Properties 1
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
0.951
g/cm³
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
0.21
g/10 min
  
190°C/21.6 kg
20
g/10 min
  
Environmental Stress-Cracking Resistance (ESCR)
     ASTM D1693
50°C, 2.00 mm, 10% Igepal, Compression Molded, F50
150
hr
  
50°C, 2.00 mm, 100% Igepal, Compression Molded, F50
1000
hr
  
Biobased Content
95
%
 ASTM D6866
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break, Compression Molded)
35.0
MPa
 ASTM D638
Flexural Modulus - 1% Secant (Compression Molded)
1100
MPa
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Unnotched Izod Impact (Compression Molded)
180
J/m
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded)
70.0
°C
 ASTM D648
Notes
1Typical properties: these are not to be construed as specifications.
 
Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.