Resinex, Member of the Ravago Group
Saturday, October 19, 2019
Braskem PE SGE7252XP
Units 
Braskem Europe GmbH - High Density Polyethylene
ActionLegend (Open)
E-Mail a Datasheet Print this Page  

General Information
Product Description
SGE7252XP is a bimodal high density polyethylene specially developed to manufacturing of caps and closures to beverages and soft drinks with low CO2 content. This grade offers a good balance between chemical and mechanical resistance, good processability and organoleptic properties. The minimum biobased content of this grade is 94%, determined according to ASTM D6866.

Application:
Caps and closures for low or non CO2 content.

Process:
Injection Molding.

Additives:
Slip Agent.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Slip
Features 
  • Bimodal Molecular Weight Distribution
  • Chemical Resistant
  • Good Organoleptic Properties
  • Good Processability
  • Renewable Resource Content
  • Slip
Uses 
  • Caps
  • Closures
  
Agency Ratings 
  • FDA 21 CFR 177.1520
Processing Method 
  • Injection Molding
ASTM & ISO Properties 1
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
0.950
g/cm³
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
2.1
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (ESCR) (Compression Molded, F50)
15.0
hr
 ASTM D1693
Biobased Content
94
%
 ASTM D6866
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, Compression Molded)
26.0
MPa
 ISO 527-2
Tensile Stress (Break, Compression Molded)
32.0
MPa
 ISO 527-2
Tensile Strain (Yield, Compression Molded)
9.0
%
 ISO 527-2
Tensile Strain (Break, Compression Molded)
400
%
 ISO 527-2
Flexural Modulus (Compression Molded)
1100
MPa
 ISO 178
Notes
1Typical properties: these are not to be construed as specifications.
 
Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.