Resinex, Member of the Ravago Group
Saturday, October 19, 2019
Braskem PE SPB608
Units 
Braskem - Low Density Polyethylene
ActionLegend (Open)
E-Mail a Datasheet Print this Page  

General Information
Product Description
SPB608 is a low density polyethylene designed for injection molding. This grade shows excellent processability being indicated for applications where low viscosity is required during processing. Injection molded products with this resin shows good flexibility. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866.

Applications:
Masterbatches. Covers and injected parts with large flat area.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • Latin America
  
Features 
  • Additive Free
  • Good Flexibility
  • Good Processability
  • Low Viscosity
  • Renewable Resource Content
Uses 
  • Masterbatch
Agency Ratings 
  • FDA 21 CFR 177.1520
Processing Method 
  • Injection Molding
ASTM & ISO Properties 1
Physical
Nominal Value
Unit
Test Method
Density
0.915
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
30
g/10 min
 ASTM D1238
Biobased Content
95
%
 ASTM D6866
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Compression Molded)
8.00
MPa
 ASTM D638
Tensile Strength (Break, Compression Molded)
8.00
MPa
 ASTM D638
Tensile Elongation (Break, Compression Molded)
390
%
 ASTM D638
Flexural Modulus - 1% Secant (Compression Molded)
450
MPa
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Compression Molded)
39
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
79.0
°C
 ASTM D1525 2
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
 
Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.