Resinex, Member of the Ravago Group
Saturday, October 19, 2019
Braskem PE TS7006
Units 
Braskem - Low Density Polyethylene
ActionLegend (Open)
E-Mail a Datasheet Print this Page  

General Information
Product Description
TS7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin presents a great combination among mechanical, optical and stiffness properties. Besides TS7006 has low gels content which ensure a production of excellent appearance films. This product is identified as PE 114 according to ASTM D-4976-04a standard specification.

Additives:
Antiblocking
Slip agent

Application:
High clarity films for coextruded food packaging, such as: cheese, meat, sausages, sliced ham, etc.

Process:
Blown Film Extrusion
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • Latin America
  
Additive 
  • Antiblock
  • Slip
  
Features 
  • Antiblocking
  • Good Optical Properties
  • Good Stiffness
  • High Clarity
  • Low Gel
  • Slip
Uses 
  • Blown Film
  • Film
  • Food Packaging
  • Laminates
  • Packaging
Agency Ratings 
  • ASTM D4976-PE114
  • FDA 21 CFR 177.1520
  
Processing Method 
  • Blown Film
  • Coextrusion
  
ASTM & ISO Properties 1
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
0.925
g/cm³
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
0.60
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Secant Modulus - 2% Secant, MD (40 µm, Blown Film)
140
MPa
 ASTM D882
Secant Modulus - 2% Secant, TD (40 µm, Blown Film)
170
MPa
 ASTM D882
Tensile Strength - MD (Break, 40 µm, Blown Film)
25.0
MPa
 ASTM D882
Tensile Strength - TD (Break, 40 µm, Blown Film)
20.0
MPa
 ASTM D882
Tensile Elongation - MD (Break, 40 µm, Blown Film)
280
%
 ASTM D882
Tensile Elongation - TD (Break, 40 µm, Blown Film)
870
%
 ASTM D882
Dart Drop Impact (40 µm, Blown Film)
140
g
 ASTM D1709
Elmendorf Tear Strength - TD (40 µm, Blown Film)
160
g
 ASTM D1922
Optical
Nominal Value
Unit
Test Method
Gloss
     ASTM D2457
45°, 40.0 µm, Blown Film
55
 
  
60°, 40.0 µm, Blown Film
80
 
  
Haze (40.0 µm, Blown Film)
12.0
%
 ASTM D1003
Notes
1Typical properties: these are not to be construed as specifications.
 
Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.