Biesterfeld
Thursday, October 23, 2014
POLYLAC® PA-758R
Units 
CHI MEI CORPORATION - Acrylonitrile Butadiene Styrene
ActionLegend (Open)
Literature Material Safety Datasheet Request for Quotation UL Yellowcard E-Mail a Datasheet Print this Page  

General Information
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
RoHS Compliance 
  • RoHS Compliant
Processing Method 
  • Injection Molding
ASTM & ISO Properties 1
Physical
Nominal Value
Unit
Test Method
Density (23°C)
1.08
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
27.3
cm³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
44.8
MPa
ISO 527-2/50
Tensile Stress (Break)
33.0
MPa
ISO 527-2/50
Tensile Strain (Break)
60
%
ISO 527-2/50
Flexural Modulus 2
2000
MPa
ISO 178
Flexural Stress 2
65.0
MPa
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     
--
14
kJ/m²
ISO 179
--
11
kJ/m²
ISO 179/2C
Charpy Unnotched Impact Strength
     
--
51
kJ/m²
ISO 179
--
57
kJ/m²
ISO 179/2U
Notched Izod Impact Strength
14
kJ/m²
ISO 180/1A
Unnotched Izod Impact Strength
55
kJ/m²
ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)
77.6
°C
ISO 75-2/A
Heat Deflection Temperature (1.8 MPa, Annealed)
96.0
°C
ISO 75-2/A
Vicat Softening Temperature
     
--
102
°C
ISO 306/A50
--
105
°C
ISO 306/A120
--
93.8
°C
ISO 306/B50
--
97.2
°C
ISO 306/B120
Flammability
Nominal Value
Unit
Test Method
Flame Rating (1.59 mm)
HB
 
UL 94
Processing Information
Injection
Nominal Value
Unit
 
Drying Temperature
85.0
°C
 
Drying Time
3.0 to 5.0
hr
 
Rear Temperature
200 to 220
°C
 
Middle Temperature
220 to 250
°C
 
Front Temperature
220 to 250
°C
 
Processing (Melt) Temp
230 to 240
°C
 
Mold Temperature
50.0 to 70.0
°C
 
Injection Pressure
4.90 to 7.85
MPa
 
Holding Pressure
1.96 to 4.90
MPa
 
Back Pressure
0.490 to 0.981
MPa
 
Notes
1Typical properties: these are not to be construed as specifications.
22.0 mm/min
 
UL IDES

UL and the UL logo are trademarks of UL LLC © . All Rights Reserved.

Nominal ValueThe information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

www.ides.com