Ultrapolymers
Thursday, September 4, 2025
ENFLEX® VU-120-55A
Units 
Ravago Manufacturing Turkey - Thermoplastic Vulcanizate
ActionLegend (Open)
E-mail a Datasheet Print this Page  

General Information
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Ozone Resistant
  • UV Resistant
  
Processing Method 
  • Extrusion
  • Injection Molding
  
Properties 1
Physical
Nominal Value
Unit
Test Method
Density
0.960
g/cm³
 ISO 1183
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (100% Strain)
1.80
MPa
 ISO 37
Tensile Stress (300% Strain)
2.90
MPa
 ISO 37
Tensile Stress (Break)
5.70
MPa
 ISO 37
Tensile Elongation (Break)
550
%
 ISO 37
Compression Set
     ASTM D395B
23°C, 72 hr
24
%
  
70°C, 22 hr
31
%
  
100°C, 22 hr
33
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
55
 
 ISO 868
Additional Information
The value listed as Density, ISO 1183, was tested in accordance with ISO 2781.
Tear Strength, ISO 34-2: 25 kN/m
Ozone Resistance, ISO 1431: No Crack
Processing Information
Injection
Nominal Value
Unit
 
Drying Temperature
90
°C
  
Drying Time
2.0
hr
  
Rear Temperature
170 to 180
°C
  
Front Temperature
190 to 200
°C
  
Nozzle Temperature
200 to 210
°C
  
Processing (Melt) Temp
210 to 220
°C
  
Mold Temperature
10 to 50
°C
  
Screw L/D Ratio
20.0:1.0
 
  
Screw Compression Ratio
2.5:1.0
 
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
90
°C
  
Drying Time
3.0
hr
  
Cylinder Zone 1 Temp.
170
°C
  
Cylinder Zone 2 Temp.
180
°C
  
Cylinder Zone 3 Temp.
190
°C
  
Cylinder Zone 4 Temp.
195
°C
  
Cylinder Zone 5 Temp.
200
°C
  
Extrusion Notes
Machine Capacity, 30 mm cylinder diameter: 15 to 20 kg/hr
Machine Capacity, 45 mm cylinder diameter: 60 to 85 kg/hr
Machine Capacity, 60 mm cylinder diameter: 100 to 150 kg/hr
Machine Capacity, 90 mm cylinder diameter: 225 to 300 kg/hr
Notes
1Typical properties: these are not to be construed as specifications.
 
Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.